1st Access Porsche PCM5.0 MH2p Engineering Menu
2nd set up the IP address
3rd windows ＋Ｒ, CMD ping 172.16.250.248
If you want to know more about Porsche, please click Porsche Trouble Repair.
2022年2月15日星期二
How to configure BMW ISTA 4.28.xx software with new Firmware
What is BMW Rheingold ISTA ?
ISTA is a workshop system that contains BMW AG Data and Information. ISTA stands for Integrated Service Technical Application. Way back when, during the initial development of this tool, BMW used DIS (Diagnostics Information System), and as the programs evolved and due to the nature of the file naming conventions utilized by BMW, the workshop system became known as Rheingold in the enthusiast world. Rheingold in actuality is the folder that contains the main application and data. Rheingold became ISTA-D (D stands for Diagnostics) and BMW’s programming application (not discussed in this document) used the same nomenclature, ISTA except with a P (for programming) or ISTA-P.
This instruction show you guide on how to configure BMW ISTA 4.28.xx software with new Firmware BMW_ISPI_ICOM-FW_03-15-04.msi for ICOM A1 & A2.
Requires:
BMW Rheingold ISTA+ 4.31.40 4.23.14 &ISTA-P Free download
Config Manual for ISTA 4.28.xx & BMW Standard tools
1.ICOM A1, A2, BMW ICOM update firmware to BMW_ISPI_ICOM-FW_03-15-04.msi
2.Log in to ICOM http://169.254.92.38:58000/
3.Go to LAN Setting and set Discover Mode to APIPA Save Changes and reboot ICOM.
4.On your Laptop go to Ethernet Properties and set (TCP/IPv4) to DHCP.
Connect your laptop and ICOM with Ethernet cable.
5.Open ediabas konfigurator2.0.0
Select ICOM (Ethernet) This will be used with ISTA 4.28.x.x For BMW Standard Tools check setting below. Under BMW Standard Tools Config
Click on OK
6.Open ISTA 4.28.xx and set Vehicle Interface to see below.
7.You Can now connect to your car E – F – G series. See that you ip has changed to 192.168.x.x This will not happening with INPA……
BMW Standard Tools Config
After you have configured everything for ISTA 4.28.xx and everything works as described above. You only need to set the (Configuration) Interface = to Remote as indicated below. EDIABAS will connect with IP 169.254.92.38
This will be used for BMW Standard Tools
You can now connect with ITool Radar or Easy connect, and use INPA, NCS-Expert Tool, Tool32, WinKFP.
2022年1月28日星期五
Caterpillar ET 2021B 2019C 2018A Electronic Technician Software Free Download
What is Caterpillar ET?
Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.
Caterpillar ET Functions List:
1.View active and logged diagnostics.
2.View events where irregularities occurred and were logged by the ECM.
3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
4.Record and log performance data.
5.Graph a group of status parameters.
6.View the current configuration of an ECM.
7.Change ECM configurations.
8.Perform diagnostic tests.
9.Perform calibrations.
10.Print reports and diagnostic results.
11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Caterpillar ET Support Languages:
English,Chinese,Danish,French,German,Italian,Portuguese,Spanish
Caterpillar ET Support OS:
Window 7,Window 8,8.1,Window 10 32 bit and 64 bit
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor·
3GB RAM·
3GB of available hard disk drive·
DVD-ROM drive·
15.4 inch XGA Screen (1280×1024 compatible)·
MicrosoftÒWindows™ 7 Professionalor Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorerversion 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater·
1GB RAM·
500MB of available hard disk drive·
CD-ROM drive·
Super VGA monitor or display (1024×768)·
MicrosoftÒWindows™ 7 Professional or Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorer version 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Caterpillar ET Free Download
Caterpillar ET 2018 A
https://mega.nz/#!zIZUDARZ!q8wQWzgM9CeZrxZdp5VhaFCRULvv_b_ENE0e1Oe_UHM
Caterpillar ET 2021B & 2019C Download (paid version work 100%)
https://www.obd2tool.com/goods-10220-Cat-Caterpillar-ET-Cat-ET-3-Software.html
Mitsubishi MUT-3 diagnostic tool Plus Lenovo X220 Laptop for cars and trucks with CF card and Coding Function
We will install the software before the shipment , so you can get it work directly after you receive it.
Software is Updated to 2015.09 for car
Software is Updated to 2012.09 for truck
Supported Languages: English, Spanish, French, Italian, Turkiah, Greek, German, Czech, Polish, Russian
Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided (with
reprogramming data) is a Compact Flash memory card (MB991853)
inserted into the CF card adapter (MB991939).
Features:
1. Color Display.
2. Fast vehicle scan.
3. Can perform drive recorder on most Mit-subishi vehicles.
4. Data Display utilizes either graphical or digital display.
Product Description:
In accordance with releasing new products that introduce CAN
communications systems, MMC has developed the MUT-III as a next
generation diagnosis tester for servicing these new and future vehicles.
A personal computer (PC) is connected to the MUTIII unit and used as a system’s control terminal, and communicates with a vehicle ECU through the VCI. In addition to being able to handle all diagnosis functions covered by the conventional MUT-II tester, the MUT-III system can display data as easy-to-understand diagrams and graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III can retain data on all vehicles, from old to new models, classified according to destination in the PC’s hard disk. This eliminates the awkward but essential job with the MUT-II, of switching the data list (communications protocol data and diagnosis item list database) by replacing the ROM pack with another according to the vehicle model and year model.
New functions that make use of the advantages of the PC are also being developed. For example, the workshop manual viewer is a useful function for mechanics as they no longer have to carry around a thick manual and search for relevant pages while working on a vehicle. The workshop manual viewer is currently available for certain vehicle models, and allows users to retrieve the pages containing the failure code for a particular problem at the push of a button.
Set Includes:
1. Vehicle Communication Interface (V. C. I. ) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.
1). When connected with the PC
– Vehicle diagnosis (Interactive fault diagnosis)
– SWS communication; CAN communication support
– Drive recorder
– ECU reprogramming
– Volt, Ohm, measurement
– Fuel pressure measurement (Not available in US)
2). When used with the V. C. I. Unit (disconnected from PC)
– V. C. I. Stand-alone diagnosis
– Drive recorder
– ECU reprogramming
– Volt, Ohm measurement
– Belt Tension measurement
(MB991939).
2. MUT-III Main Harness A (MB991910)
Used when connecting the V. C. I. with vehicles that have
Only one 16-pin diagnosis connector.
– Supports fault diagnosis and ECU updating on the
Above-described vehicles
– Supports the CAN communication system
3. MUT -III Main Harness B (MB991911)
Used when connecting V. C. I. with vehicles that have a 16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin) Diagnosis
connector, connect the M. U. T. -II adapter harness (MB991498)
to the end of this harness in the same as M. U. T. -II, and power is supplied from the cigarette lighter Socket.
Package List:
1. Carrying case
2. Vehicle Communication Interface (VCI).
3. 2pcs 16pin Adapter
4. USB 2.0 cable.
5. Harness 1 (yellow,1-2).for old cars
6. Harness 2 (red, 1-3).for old cars
7. Harness 3 (blue).for new cars
8. Harness 4 with lighter (1-4) for trucks
9. Harness 5 (black) for trucks
10.1pcs memory card
11.1pc x Second Hand Laptop Lenovo X220 laptop with software
Second Hand Laptop Lenovo X220 Laptop with V2021.10 software：
Brand: Lenovo
Condition: Used
Type:Laptop/Notebook
Screen Size:12.0
Processor Type:Intel (R) Core(TM) I5-2520M CPU
Processor Speed:2.50 GHz
Memory: 4GB
An item that has been used previously. The item may have some signs of
cosmetic wear, but is fully operational and functions as intended.
Primary Drive: DVD+/-RW Processor Speed: 2.53GHz
Processor Configuration: Dual Core
订阅：
博文 (Atom)