VXDIAG Benz Star C6 Xentry diagnosis with DoIP better than C4 C5

VXDIAG Benz Star C6 Xentry diagnosis, supporting DoIP, performing diagnosis, repairs, program electric and electronic on-board vehicle systems, cover more functions during SCN Coding than SD C4/C5, for more features, coverage, functions, language, update etc, please continue reading.

vxdiag Benz Star C6 for Xentry diagnosis highlights
1.Also called Star C6
2. Support DoIP, cover more functions during SCN Coding than SD C4/C5. Even can turn on hidden features.
3. Same Star Diagnostic & programming (SCN Coding) functionas ORIGINAL DIAGNOSIS VCI

4. Allow to pay to add any of these car brands: GM, Ford, Mazda, Toyota, Honda, LandRover,  Jaguar, Subaru, Volvo, VW and For Porsche
vxdiag Benz Star C6 for Xentry diagnosis Details
Version:
2018/ 7, it means works with the Mercedes Benz & Smart cars up to 2018 year.

VXDIAG Benz C6 Languages:
22 languages in total.

Vxdiag Benz C6 update:
Only the serial number after 71 can be update. The update way is to browse official site http://www.vxdiag.net, through the newest vxdiag manager to enter DoIP to update.

Coverage:
Mercedes Star Diagnostic & Smart vehicles up to 2018 year including:
Passenger car…Yes
Van…Yes
truck…Yes
Unimogs…Yes
Busses…Yes
Super sports cars…Yes
industrial major assemblies…Yes

Multi-system diagnosis:
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorization System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tire Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
Functions
Diagnosing…Yes
Programming (SCN Coding)…Yes
Simulation studying…Yes
Repair information…Yes
Automotive maintenance…Yes
Technical service bulletin…Yes
key programming…Not support
Turn on hidden features:
Unlock the central control
Reset wiper
Open the CIC menu
Auto close skylight
Brake light flashes when braking
Automatically release the handbrake
Lane Departure system identify roadside
Change Lane warning speed
Surround sound tire pressure monitoring
Display engine output power

How to use vxdiag Benz Star C6?
The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Tips
1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If you change a new laptop, software may get broken and need to ship HDD back to the dealer to copy software again.
Here attach serveral images of software:


Technical support source:
http://cheapobd2tool.com/2018/08/13/vxdiag-benz-star-c6-xentry-diagnosis-with-doip-better-than-c4-c5/

The teck 2 scanner is able to check all GM before 2009

I  just did a “Fast-Learn” on a G8’s 6L80E last week with mine. A Snap-On MODUS was not able to do this. There are simply factory diagnostic procedures that a T2 can do on GM vehicles that no other tool can. But yes, to reflash PCM’s, TCM’s, etc, you need to have authorization from the Tech Center, which means you have to be a dealership or a paying subscriber to the service which is a serious chunk of $$$$.
With that said, Bosch (who now owns the rights to GM Tech 2‘s as they purchased out Vetronix), will not support the unit because it’s a factory knock-off. So should you have to replace the VCI module (I’ve had to replace mine due to wear and tear on the connection where it damaged the motherboard inside), or any other necessary repair.
Also, T2’s can only be updated through 2009 MY vehicle info, was my understanding from GM. For 2009+ GM has gone to a new setup called MDI. GM MDI is backwards compatible with pre-2009 GM vehicles (it even has the software on the screen to emulate the screens you’d see on the T2).
So is this teck 2 scanner able to check all GM before 2009 obd2 with out extra software? Also wonder if it can check the cam/ distributor retard timing on vortex 350
I think the GM MDI system will go back to 2009, but the Tech2 seems to work as far as its updated. Obviously I don’t have any 2012-2013 vehicles to try it on though.
It will work on any Car Diagnostic Tool GM OBD2, meaning 1996+.
Here you can see its updated to 2013.

http://wholesaleobd2.net/2018/08/06/the-teck-2-scanner-is-able-to-check-all-gm-before-2009/

How to Add Mercedes W211 Key with CGDI Prog MB

How to add new key to Mercedes W211 (copy key with key) using CGDI Prog MB Key Programmer.
Connect the Key Programmer CGDI MB, the OBD connects the vehicle, opens the door, and keeps the vehicle voltage stable (12V).

open software，click“Read EIS Data”

Read data success，show related information

Turn to “Compute password”，choose“ copy key with key”，then click“Collect Data”

choose“other keys”, Click ”ok’

please insert the key into EIS and click ok

please insert the key into the CGMB device and click ok

It is collecting the key data

Key collection finished，please insert the key into EIS and click ok

please wait 9 seconds

please pull out the key from the EIS, and then click ok

please insert the key into the EIS again and click ok

Pull out the key for 5 seconds,then insert the EIS, then click ok

please insert the key into the CGDI MB device from www.obd2tool.com again and click ok

Collect success, save data, default file name

Save the file successfully，click ok

Click ” Upload Data ”

Open the file just saved in last step

Upload data successfully

Click“Query Result”, please wait patiently

Computing success，click ok

Copy password

Go to the EIS interface and paste

Save EIS data

Turn to“Generate EE”，Load EIS file just saved

Check the information and click“Generate key file”

Generated file successfully and save the file

Go to “Read/ write Key

Put new key into CGDI Prog

Show key information after reading

Click“Rest/wipe”, prompt ”Reset operation succeed, click ok

Click“open/write”，please note the prompt

Choose an unused key position

write success

Insert the new key into EIS and start
Read EIS again. show that key position was used.
Program success.

wiTECH Bandwidth Requirements

DESCRIPTION:
*   Reliable Internet connection speed and consistency are essential for the wiTECH System to complete flashes.
*   It is recommended that the communication speed of your Internet connection be a minimum of 1.5Mb/sec (Megabits per second) for the 1st witech Micropod 2 Client.
*   Each additional wiTECH Client should have 1.5Mb/sec. of additional available bandwidth.  Of course, the better the connection is, the faster the flash files will download before the flashing will commence.
ABOUT CONNECTION SPEED
*   Most Internet Service Providers (ISPs) advertise their Internet connection speeds in Mb/s or Mbps (Megabits per second).
*   However, when testing your Internet connection, sometimes the results are displayed as MB/s (note the capital B) which means Megabytes per second.
*   There is a big difference between the lowercase b and the uppercase B. If the results are displayed as MB/s then the number has to be multiplied by 8 in order to obtain the speed results in Mbps:
For example, if the speed test resulted in a speed of 1.5MB/s (note the capital B), then we would calculate Megabits as follows:
1.5 x 8 = 12
By this calculation, the Internet connection speed is 12Mbps (12 Megabits per second).
TESTING YOUR CONNECTION SPEED
*   Two popular speed test websites are www.speakeasy.net/speedtest and www.speedtest.net.
*   *   Both websites already display the results in Mbps (Megabits per second).
*   As resources on the network are used, bandwidth availability can be reduced. Therefore we recommend performing a network speed test from multiple machines simultaneously to capture true network speed.
Speedtest.net:
*   Speedtest.net automatically chooses the test location for you; all you have to do is click on the Begin Test button in the middle of the site.
*   The results will be displayed once the test is completed.
Speakeasy.net
*   The Speakeasy.net speed test lets the user chose the target location of the test.
*   *   We recommend that you choose the target server that is closest to your dealership.
*   After choosing a location the speed test will automatically begin and results will be displayed once completed.

http://cheapobd2.com/2018/07/25/witech-bandwidth-requirements/