Ktag fw 7.020 China Clone PCB Vs Ktag fw7.020 ECU clone PCB

This post includes Car Scanner Ktag fw 7.020 China Clone PCB, Ktag fw7.020 ECU clone PCB.
Part 1: Ktag fw 7.020 China Clone PCB
Ktag fw 7.020 China Clone is available with two versions: Item No. SE135 (Black one) and Item No. SE135-B (Black and blue one).
NEW!
Ktag KTM100 Ksuite V2.23 Master China Clone
Works: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc. Details
FULL !!! Cars, Motorcyle, Tricore, Trucks
ALL made in China but with good QUALITY! (Check the real pictures below)
Unlimited Version!  With Tokens reset button and press it to have more tokens, easy to use!
Working with internet ON (better disable the network connection)
6 languages available: Italian Deutsch English French Portuguese Spanish
Warranty for interface: 12 months.
All packages include:
1 x KTAG 7.020 Main Unit
1 x 144300T 104
1 x 144300T 103
1 x 144300T 101
1 x 144300T 106
1 x 144300T 102
1 x 144300T 105
1 x 144300T 100
3 x Chips Inside
1 x Multi-Color Cable
1 x USB Cable
1 x Power Adapter
1 x CD
(Black one) PCB


(Black and blue one)PCB



Part 2: Ktag fw7.020 ECU clone




All packages include:
Enabled protocols: Tricore boot mode MEDC17 / ST10 / DSG DQ200/250/500
KESS2 Master interface with UNLIMITED TOKENS
Software v2.23 with dongle
USB Cable
Standard OBD2 Cable CAN/J1850/K-Line 144300KCAN
Universal Cable for KESSv2 (5 wires) 144300K201
Tricore EDC17/MED17 Bootloader Module 14P600BTLR
Tricore cable 14P600KT02
Flat cable for frame adapter MEDC17 14P600KT03
To sum up
ECU Chip Tuning Ktag fw7.020 China clone is suitable for those who are new to ECU tunning world and has not too much budget. Ktag fw7.020 China clone is good quality and works ok, if you think China clone is shit, it is prejudice definitely.
Ktag fw7.020 EU clone has better quality, I agree, but the price is 3 times higher.

(Solved) Cummins Insite ECM Connection Error 5204

Here you go… How to solve Cummins Insite 8.1 Connection Error 5204 5202 5201 5200
with DPA5 Adapter, i try to connect with Cummins insite and i have error code 5204 or only no connection and not blinking the leds
This is the error 5204 popped up when connect Prostar 2005 with cummins engine:
ECM connection
Error number: 5204
Communication between the datalink adapter and the ECM could not be established BY Heavy Duty Scanner.
Please check the following conditions:
The key switch is on
The cables are between the datalink and the ECM are properly connected
The cables are in good condition
The correct adapter type is selected
The correct communication protocol is selected
Select retry, cancel or help for additional troubleshooting steps

Here is what have been tried but failed!
Try to connect whit J1939…..same issue
On truck does not even get the engine and the others only couple line and very slow, might be some thing with them trucks
some things odd2006 models connect through J1939 and works.
Tryed on 3 trucks already that are 2005 and older the connect thought J1708 it says engine 128
And when doing the J 1939 test on them it says something like data error
Check the driver is installed well
J1939 & J1708 are added to the software
Finally, SOLVED!
The solution is this, connect, then scan to diagnostic connector but not to USB, open the Cummins insite and push connect, when the Insite begin to connect, immediately connect the USB and ready….
The final tip- Error Messages for communication failures:
Error 5200: Indicates communication loss between computer and the datalink adapter.
Error 5201: Indicates communication loss between the datalink adapter and the ECM.
Error 5202: Indicates no communication could be established between the datalink adapter and the computer.
Error 5204: Indicates no communication could be established between the datalink adapter and the ECM.
If the “Auto Configure” and/or “Datalink Adapter Connection Test” do not find the adapter when connected, manually configure the Cummins INLINE 6 Data link adapter connection.